Effortlessly add two serial ports to your Express Card enabled laptop! This Express Card by SIIG allows you to connect two serial peripherals to one Express Card slot. This is a perfect solution to communicate with you devices with computers that do not have serial ports installed on them.
Nov 4, 2014 - Free Download My CyberCafe 11.0 - Powerful management solution for Internet cafes, comprising a server and client utility, which allows admins to re.
Express Card Technology Express Card technology has emerged with faster speeds and better efficiency than typical PCMCIA and Cardbus PCMCIA. Unfortunately, the technology is still new and it doesn't offer too many options to connect with older interfaces such as Serial and Parallel. SIIG has developed this Express Card to work directly with your laptop as a serial port. With this you can connect your GPS, PDA, or other serial equipment without having interface issues. Connecting the two serial devices to the Express Card is simple.
Just connect the included cable to the card and then connect the device to the cable. The fan-out cable is removable for easier storage and to protect the Express Card from breaking. This 34mm feature makes it possible to fit into either 34mm or 54mm slots.
The smaller size makes it great to take between your office and home. Efficient Data Transfers This Cyber Serial Express Card is equipped with FIFO (Fist In First Out) which allows information to be dealt with in the order it is received. This improves the transfer rate of data which makes it more efficient.
Raymond Calvel The Taste Of Bread Pdf To Word. This is especially important for multi-tasking operations. The Serial Express Card also supports data rates up to 115Kbps which will provide you with a steady flow of data throughout its processes. The Cyber Serial Express Card is a great solution to connect with your older peripherals without having to buy new ones. This Express Card comes with a lifetime manufacturer warranty. This will protect you from defects and unwanted bugs for the life of the Express Card. Have a bunch of PC Cards that don't fit in your Express Card slot? Typograf 5 1 2 Serial To Usb here.
Start by going to the Device Manager. Once there do the following: Expand the Ports ‘(COM& LPT)’ You should be looking at something like this: As you can see Windows has set the port to COM10. However many legacy applications expect the port to be between 1-4. Let’s change that: Right click on the device and click on ‘Properties’.
Click on ‘Port Settings’. Then click on ‘Advanced’. Once you’re in ‘Advanced Settings for COM10’ on the bottom you can see the ‘COM Port Number: COM10’. Click on that to change it to the lowest possible number (between 1-4). Then click ‘OK’ on all open Property Windows. Now the device should look like this. I found a code that allows you to remove old associations to COM Ports.
You can then plug your adapter in and then associate it with the COM Port you need. Start, All Programs, Accessories, Right-click “Command Prompt” in Accessories and choose “Run as Administrator” 2. Enter “set devmgr_show_nonpresent_devices=1″ – without the quotes obviously 3. Enter “start devmgmt.msc” 4. In the box that opens, select “Show hidden devices” in the ‘view’ menu.
Now if you expand the section on COM ports, all the COM ports that have ever been created will be displayed, the non present ones being in grey. You can uninstall away anything that you don’t want (right click, select uninstall). I also have the problem where the Prolific USB to serial is installed on com11 and the “advanced” button leads to anohter screen, but there is no provision for changing com port there.
Might be IT department blocks that on company PC. I blame the device driver installation software -it SHOULD show defaults and ASK the user if they want to make changes before installing. No nothings can just push the button to install defaults, those of use who know what settings we need could then get it right. • Brad Fluharty. Hi Bernie – I’m not sure if your postings on this topic has closed.
I had an “Ham” HF radio connected to a desktop XP and a logging program via RS-232. As I changed bands on the radio, the log program would follow, recording time and date and the frequency of operation. Then, the PC was struck by lightning and I got another PC with new motherboard running Windows 7. I now have a radio that runs a USB cable that controls a Contest Logging program However when using an RS232 cable to control my normal logging for contacts, the program does not see the radio or the cable. I have tried changing the port numbers but the program still does not see the radio.
The two existing ports are 1 and 3 both with Nuvoton Drivers. I tried deleting them but then can not create a new COM1. With the drivers back into the PC, I tried using COM3 for the Ham Logging program but there is still no ‘comms’ between the radio and PC. Please HELP!! Ham/Sam • Jeanie. Hi Jeanie I’m a complete computer illiterate!!